Dell PowerVault MD3200 Owner's Manual page 33

Item Component
9 Controller power
LED
10 SAS IN 0 port
link/fault LED
11 Controller fault
LED
12 System
identification
LED
13 SAS IN 1 port
link/fault LED
14 Cache active or
cache offload
LED
15 Battery fault
16 Password Reset
switch
17 SAS IN 2 port
link/fault LED
Function
Lights green when controller power is on.
Off when controller is not powered.
Lights green when all four links are connected.
Lights amber when one to 3 links are disconnected.
Off when all links in the port are disconnected or cable is
disconnected.
Lights amber when controller fault detected.
Off when controller operating normally.
Blinks blue when system identification switch push-button
on enclosure front panel is pressed.
Lights green when all four links are connected.
Lights amber when one to 3 links are disconnected.
Off when all links in the port are disconnected or cable is
disconnected.
Lights green when on-board controller memory contains
data.
If AC power fails, this LED changes to indicate Cache
Offload status.
If the password reset function has successfully changed the
password, this LED flashes on and off briefly.
Lights amber when battery backup unit or battery has
failed.
Off when battery backup unit is operating normally.
Activating this switch deletes the password.
Lights green when all four links are connected.
Lights amber when one to 3 links are disconnected.
Off when all links in the port are disconnected or cable is
disconnected.
Planning: RAID Controller Modules
33