Removing A Raid Controller Module - Dell PowerVault MD3200 Owner's Manual

Removing a RAID Controller Module

CAUTION:
Many repairs may only be done by a certified service technician.
You must only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Disconnect the cables connected to the RAID controller module.
2 Push down on the release tab and pull the release lever away from the
chassis. See Figure 15-8.
3 Grasp the release lever and pull the module away from the chassis.
NOTE:
module, do not stack RAID controller modules.
Figure 15-8. Removing and Installing a RAID Controller Module
1
1 RAID controller module
3 release lever
To avoid damage to the sensitive EMI contacts on the RAID controller
2
Management: Installing Array Components
3
2 release tab
211