Dell PowerVault MD3200 Owner's Manual page 109

To create a security key:
1 In the AMW toolbar, select Storage ArrayPhysical Disk Security
Create Security Key.
The Create Security Key window is displayed.
2 Enter a string that becomes part of the secure key identifier, in Security
key identifier.
You can enter up to 189 alphanumeric characters without spaces,
punctuation, or symbols. Additional characters is generated automatically
and is appended to the end of the string that you enter. The generated
characters help to ensure that the secure key identifier is unique.
3 Edit the default path by adding a file name to the end of the path or click
Browse, navigate to the required folder and enter the name of the file.
4 Enter a string for the pass phrase, in Pass phrase.
The pass phrase must:
• be between 8 and 32 characters long.
• contain at least 1 uppercase letter.
• contain at least 1 lowercase letter.
• contain at least 1 number.
• contain at least 1 non-alphanumeric character, for example, < > @
+.
The pass phrase that you enter is masked.
NOTE:
Create Key is active only if the pass phrase meets the above mentioned
criterion.
5 In Confirm pass phrase, re-enter the exact string that you entered in Pass
phrase.
Make a record of the pass phrase that you entered and the security key
identifier that is associated with the pass phrase. You need this
information for later secure operations.
6 Click Create Key.
7 Make a record of the security key identifier and the file name from the
Create Security Key Complete dialog, and click OK.
Configuration: Disk Groups and Virtual Disks
109