On the target storage array:
1 Insert the exported physical disks into the available physical disk slots.
2 Review the Import Report for an overview of the disk group that you are
importing.
3 Check for non-importable components.
4 Confirm that you want to proceed with the import procedure.
NOTE:
procedure.
The following settings are removed/cleared during the procedure:
•
Persistent reservations
•
Host-to-virtual disk mappings
•
Virtual disk copy pairs
•
Snapshot virtual disks and snapshot repository virtual disks
•
Remote mirror pairs
•
Mirror repositories
Non-Importable Components
Some components cannot be imported during the import disk group
procedure. These components are removed during the procedure:
•
Persistent reservations
•
Mappings
•
Virtual disk copy pairs
•
Snapshot virtual disks and snapshot repository virtual disks
Some settings cannot be imported during the import disk group
Configuration: Disk Groups and Virtual Disks
135