Configuring Dhcp Server Settings; Creating A Vlan - ZyXEL Communications XGS4700-48F Manual

In the VID field, enter the ID of the VLAN group to which you want this IP
5
interface to belong. This is the same as the VLAN ID you configure in the Static
VLAN screen.
Click Add to save the settings to the run-time memory. Settings in the run-time
6
memory are lost when the Switch's power is turned off.

5.1.2 Configuring DHCP Server Settings

You can set the Switch to assign network information (such as the IP address,
DNS server, etc.) to DHCP clients on the network.
For the example network, configure two DHCP client pools on the Switch for the
DHCP clients in the RD and Sales networks.
In the web configurator, click IP
1
Application and DHCP in the
navigation panel and click the
VLAN link.
In the VLAN Setting screen,
2
specify the ID of the VLAN to
which the DHCP clients belong,
the starting IP address pool,
subnet mask, default gateway
address and the DNS server
address(es).
Click Add to save the settings to
3
the run-time memory. Settings in
the run-time memory are lost when the Switch's power is turned off.

5.1.3 Creating a VLAN

VLANs confine broadcast frames to the VLAN group in which the port(s) belongs.
You can do this with port-based VLAN or tagged static VLAN with fixed port
members.
XGS4700-48F User's Guide
Chapter 5 Initial Setup Example
EXAMPLE
67