Multiple Spanning Tree Protocol Port Configuration - ZyXEL Communications XGS4700-48F Manual

Layer 3 managed stackable gigabit ethernet switch

Hide thumbs Also See for XGS4700-48F:

Table of Contents

Table 33 Advanced Application > Spanning Tree Protocol > MSTP (continued)

13.8.1 Multiple Spanning Tree Protocol Port Configuration

To configure MSTP ports, click Port in the Advanced Application > Spanning

Tree Protocol > MSTP screen.

Figure 73 Advanced Application > Spanning Tree Protocol > MSTP > Port

The following table describes the labels in this screen.

Table 34 Advanced Application > Spanning Tree Protocol > MSTP > Port

XGS4700-48F User's Guide

Check the rule(s) that you want to remove in the Delete column and

then click the Delete button.

Click Cancel to begin configuring this screen afresh.

This field displays the port number.

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all

ports. Use this row first to set the common settings and then make

adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you

Chapter 13 Spanning Tree Protocol

Xgs4700 series