Table of Contents
Advertisement
Chapter 9 LAN
9.3 LAN IP Screen
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 83 Network > LAN > IP
The following table describes the labels in this screen.
Table 48 Network > LAN > IP
LABEL
LAN TCP/IP
IP Address
IP Subnet Mask
Apply
Reset
9.4 LAN IP Alias
IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The X550N supports three logical LAN interfaces via its single
physical Ethernet interface with the X550N itself as the gateway for each LAN network.
To change your X550N's IP alias settings, click Network > LAN > IP Alias. The screen
appears as shown.
130
DESCRIPTION
Type the IP address of your X550N in dotted decimal notation 192.168.1.1
(factory default).
The subnet mask specifies the network number portion of an IP address. Your
X550N will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the X550N.
Click Apply to save your changes back to the X550N.
Click Reset to begin configuring this screen afresh.
X550N Series User's Guide
Advertisement
Table of Contents
Troubleshooting
