LABEL
Secured Client IP
Address
Apply
Reset
18.3 Telnet
You can use Telnet to access the X550N's command line interface. Specify which interfaces
allow Telnet access and from which IP address the access can come.
18.4 Telnet Screen
To change your X550N's Telnet settings, click Management > Remote MGMT > Telnet.
The following screen displays.
Figure 127 Management > Remote MGMT > Telnet
The following table describes the labels in this screen.
Table 81 Management > Remote MGMT > Telnet
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Reset
X550N Series User's Guide
DESCRIPTION
A secured client is a "trusted" computer that is allowed to communicate with the
X550N using this service.
Select All to allow any computer to access the X550N using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the X550N using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the X550N using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
X550N using this service.
Select All to allow any computer to access the X550N using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the X550N using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 18 Remote Management
211