Follow the steps below to back up the current switch configuration to your computer in this screen.
Click Backup.
1.
Click Save to display the Save As screen.
2.
Choose a location to save the file on your computer from the Save in drop-down list box and type a
3.
descriptive name for it in the File name list box. Click Save to save the configuration file to your
computer.
19.5 Load Factory Defaults
Press the Click Here button next to Load Factory Defaults to clear all switch configuration information
1.
you configured and return to the factory defaults. The following message appears.
Click OK to go to the next screen.
2.
Click OK to begin resetting all switch configurations to the factory defaults and then wait for the switch to
3.
restart. This takes up to two minutes. If you want to access the switch web configurator again, you may
need to change the IP address of your computer to be in the same subnet as that of the default switch IP
address (192.168.1.1).
Routing Protocol
Figure 19-4 Backup Configuration
Figure 19-5 Confirm Load factory Defaults
Figure 19-6 Restart Switch After Load Factory Defaults
VES-1124 User's Guide
19-3