Table 24-4 Command Summary: Ip - ZyXEL Communications VES-1124 VDSL-SWITCH User Manual

VES-1124 User's Guide
ip
address
alias
aliasdis
arp
httpd
icmp
ifconfig
ping
route
status
udp
tcp
telnet
traceroute
igmpsnoop
24-12

Table 24-4 Command Summary: ip

COMMAND
[addr]
<iface>
<0|1>
status
debug [on|off]
status
discovery <iface> [on|off]
[iface] [ipaddr] [broadcast
<addr> |mtu <value>|dynamic]
<hostid>
status
add <dest addr>[/<bits>]
<gateway> [<metric>]
addiface <dest addr>[/<bits>]
<iface> [<metric>]
addprivate <dest addr>[/<bits>]
<gateway> [<metric>]
drop <host addr> [/<bits>]
status
status [tcb] [<interval>]
<host> [port]
<host> [ttl] [wait] [queries]
status
querier
DESCRIPTION
Displays the host IP address.
Sets an alias for the specified
interface.
Disables/enables the alias for the
specified interface.
Displays all interfaces' IP Address
Resolution Protocol status.
Enables or disables the HTTP
debug flag.
Displays the ICMP statistics
counter.
Sets the ICMP router discovery
flag.
Configures a network interface.
Pings a remote host.
Displays the routing table.
Adds a route.
Adds an entry to the routing table
for the specified interface.
Adds a private route.
Drops a route.
Displays IP statistic counters.
Displays the UDP status.
Displays the TCP statistic
counters.
Telnets to the specified host.
Sends ICMP packets to trace the
route of a remote host.
Displays the IGMP group table.
Displays the port number of the
incoming port that received the
latest IGMP querier.
Introduction to CLI