Table 16-3 Snmp Traps - ZyXEL Communications VES-1124 VDSL-SWITCH User Manual

COMMAND
Set Allows the manager to set values for object variables within an agent.
Trap Used by the agent to inform the manager of some events.
16.3.1 Supported MIBs
MIBs let administrators collect statistics and monitor status and performance.
The VES supports the following MIBs:
SNMP MIB II (RFC1213)
RFC1493 Bridge MIBs
RFC1643 Ethernet MIB
RFC1757 RMON
RFC1155 SNMP v1
RFC2647 Bridge MIB extension (for 802.1Q)
VDSL private MIB
16.3.2 SNMP Traps
The VES sends traps to an SNMP manager when an event occurs. SNMP traps supported are outlined in the
following table.
GENERIC TRAP
0 (Cold Start)
1 (WarmStart)
2 (linkDown)
3 (linkUp)
4 (authenticationFailure) 0
16.3.3 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to go back to the
Access Control screen.
Access Control
Table 16-2 SNMP Commands

Table 16-3 SNMP Traps

SPECIFIC TRAP
0
0
0
0
DESCRIPTION
This trap is sent when the VES is turned on.
This trap is sent when the VES restarts.
This trap is sent when the Ethernet link is down.
This trap is sent when the Ethernet link is up.
This trap is sent when an SNMP request comes from non-
authenticated hosts.
VES-1124 User's Guide
DESCRIPTION
16-3