VES-1124> sys sw vlan1q svlan list
802.1Q VLAN Static Entry:
idx. Name
---- ------------ ---- -------- ------------------------
0
VES-1124>
26.7.1
vlan1q status
Syntax:
sys sw vlan1q status
This command displays the current configuration of the IEEE 802.1Q VLAN.
See the following example shows the default VLAN settings. The default VLAN allows all ports to connect to each
other and sets them to send untagged packets.
VES-1124> sys sw vlan1q status
802.1Q VLAN Setup :
GVRP = Disable
Managament VLAN ID = 1
VES-1124>
IEEE 802.1Q Tagged VLAN
VID
Active
AdCtl / TagCtl
1
1
active
FFFFFFFFFFFFFFFFFFFFFFFFFF
UUUUUUUUUUUUUUUUUUUUUUUUUU
Figure 26-14 vlan1q svlan list Command Example
Figure 26-15 vlan1q status Command Example
VES-1124 User's Guide
26-9