18.1 Static Route
Static routes tell the VES how to forward the VES's own IP traffic when you configure the TCP/IP parameters
manually. This is generally useful for allowing management of the switch from a device with an IP address on a
different subnet from that of the switch's IP address (remote management).
Click Routing Protocol in the navigation panel and then Static Routing to display the screen as shown.
The following table describes the related labels you use to create a static route.
LABEL
Active
This field allows you to activate/deactivate this static route.
Name
Enter a descriptive name for this route. This is for identification purpose only.
Routing Protocol
This chapter shows you how to configure the static routing function.
Figure 18-1 Static Routing
Table 18-1 Static Routing
DESCRIPTION
VES-1124 User's Guide
Chapter 18
Routing Protocol
18-1