Figure 26 Time Setting; Table 22 Time Setting - ZyXEL Communications PRESTIGE 335 User Manual

P-335 Series User's Guide

Figure 26 Time Setting

The following table describes the labels in this screen.

Table 22 Time Setting

LABEL
Time Protocol
Time Server
Address
Current Time
New Time
82
DESCRIPTION
Select the time service protocol that your time server sends when you turn on
the Prestige. Not all time servers support all protocols, so you may have to
check with your ISP/network administrator or use trial and error to find a protocol
that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Enter the IP address or URL (up to 20 extended ASCII characters in length) of
your time server. Check with your ISP/network administrator if you are unsure of
this information.
This field displays the time of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time
server.
This field displays the last updated time from the time server.
When you select None in the Time Protocol field, enter the new time in this
field and then click Apply.
Chapter 5 System Screens