Mac Filter - ZyXEL Communications PRESTIGE 335 User Manual

Table 35 Wireless: 802.1x and No WEP
LABEL
G+ Enhanced
Apply
Reset

8.15 MAC Filter

The MAC filter screen allows you to configure the Prestige to give exclusive access to up to
32 devices (Allow Association) or exclude up to 32 devices from accessing the Prestige (Deny
Association). Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure
this screen.
To change your Prestige's MAC filter settings, click the WIRELESS link under
ADVANCED and then the MAC Filter tab. The screen appears as shown.
Chapter 8 Wireless Security
DESCRIPTION
Select G+ Enhanced checkbox to allow any ZyXEL WLAN devices that support
this feature to associate with the Prestige. This permits the Prestige to transmit at
a higher speed than the 802.11g Only mode.
Click Apply to save your changes back to the Prestige.
Click Reset to reload the previous configuration for this screen.
P-335 Series User's Guide
131