Hardware Connections - ZyXEL Communications PRESTIGE 2302RL Quick Start Manual

2 Hardware Connections

1 LAN: Connect a computer or an Ethernet switch to this port with an Ethernet cable.
2 WAN: Connect a broadband modem or router to this port with an Ethernet cable.
3 LINE: (P-2302RL only). Use telephone wire to connect this port to the telephone jack. This is a FXO
(Foreign Exchange Office) port.
4 Phone 1-2: Connect one or more analog telephones to these ports using telephone wire. These are FXS
(Foreign Exchange Station) ports.
5 POWER: Use the included power adaptor to connect this power socket to an appropriate power source
(see the User's Guide for power adaptors by region).
The PWR/VoIP LED flashes during system startup and stays on after the system self-tests are successful. The
WAN and LAN LEDs turn on if the WAN and LAN ports are properly connected (they flash when sending or
receiving data).
P-2302R Series
3