ZyXEL Communications P-660R User Manual page 107

Table 33 Access Management > ACL (continued)
LABEL
Interface
Access Control
Listing
SAVE
DELETE
CANCEL
P-660R-Tx v3 User's Guide
DESCRIPTION
Select the port through which you can access the device. Select Both for access via
either port. If you configure 0.0.0.0 ~ 0.0.0.0 Secure IP Address, ALL services and
WAN interface, you will not be able to access the device at all from the LAN unless
you configure another rule for LAN access.
The summary table displays the configured parameters for the selected rule.
Click this so save your changes..
Select an access control rule index number and click this to remove it.
Click this to restore your previously saved settings.
Chapter 14 Access Control
107