Hardware Connections - ZyXEL Communications P-2612HW Quick Start Manual

Hardware Connections

Remove the plastic cover from the P-2612HW-F1 before you
use it.
1. DSL: Use a telephone wire to connect this port to a telephone jack (or
the DSL or MODEM jack on a splitter, if you have one).
WAN: If you have a DSL router or modem already in your network or
you want to use a cable modem, push the DSL/WAN switch to the
WAN side and use an Ethernet cable to connect this port to an
Ethernet jack with Internet access.
2. ETHERNET: Use an Ethernet cable to connect a computer to one of
these ports for initial configuration and/or Internet access.
ENGLISH
5