ZyXEL Communications P-2612HW Quick Start Manual page 10

2. Wait while the P-2612HW-F1 tries to detect your Internet connection.
If the P-2612HW-F1 cannot detect it, follow the directions in the
screen. Enter the information provided by your ISP. Keep the default
settings if your ISP did not provide some information.
3. See the back panel for the P-2612HW-F1's unique wireless SSID
(network name) and WPA-PSK encryption key. Unless you want to
use other wireless settings, you can close the wizard after you
configure the Internet connection.
To configure your wireless clients to connect to the P-2612HW-F1, see
Set Up a Wireless Network
4. When your Internet connection is setup correctly, the DSL and
INTERNET lights should be green. When you are finished click
Return to Wizard Main Page.
If you cannot access the Internet and the INTERNET light is
red, make sure you enter the correct information in the
INTERNET/WIRELESS SETUP wizard screens. If you are
using a new Internet account, contact your ISP to make sure
it is active. If you are trying to access the Internet wirelessly,
make sure the wireless and security settings in your wireless
client are the same as the settings in the P-2612HW-F1.
10
on page 11.