ZyXEL Communications P-2612HW Quick Start Manual page 13

3. In the Status screen click Network in the left panel then click
Wireless LAN. In the Wireless LAN screen click the WPS Station
tab.
4. Enter the PIN of the other WPS-enabled device into the Input
Station's PIN number text box and click Start. You can locate this
PIN number in the other device's utility or on the device itself. See the
other device's documentation if you cannot locate the PIN.
5. Click Start or Apply in the other device's utility screen within two
minutes of clicking Start in the P-2612HW-F1 web configurator
screen.
6. The P-2612HW-F1 and the other WPS-enabled device establish a
secure connection. This can take up to two minutes.
7. Congratulations! Your computer is now ready to connect to the
Internet wirelessly through your P-2612HW-F1.
Set Up a Wireless Network Manually
Configure wireless devices to use the same wireless settings as the P-
2612HW-F1. If you didn't configure the P-2612HW-F1's wireless
settings, use the wireless SSID (network name) and WPA-PSK
encryption key on the P-2612HW-F1's rear panel. The connection
procedure is shown here using Windows XP as an example.
ENGLISH
13