Channel Search - LENCO DVT-1941 Manual

Hide thumbs Also See for DVT-1941:

Table of Contents

DVB-T Setup

Channel Search

Press the

button to select Channel Search, press the ENTER button to enter, the screen will

display as below:

1. Search Type

Select Search Type and press the

Auto Scan or Manual Scan and press the ENTER button to confirm.

2. Channel No

Select Channel No and use the number buttons to input the channel number. Press the

direction buttons to remove the incorrect input. Press the ENTER button to confirm.

Note: this item is only available when "Search Type" is set to "Manual Scan".

3. BandWidth

Select BandWidth and press the

proper one and press the ENTER button to confirm.

4. Encrypted

Select Encrypted and press the

proper one and press ENTER button to confirm.

5. Update Mode

Select Update Mode and press the

the desired item and press ENTER button to confirm.

6. Start Search

After setting the items above, use the

ENTER button to start searching. During searching, press the SETUP button to stop searching

and return.

In the menu, press the

desire item.

Press the SETUP button to return to the previous

menu.

Press the SLOW/EXIT button to exit.

direction button to enter. Press the

buttons to highlight the Start Search, and press the

- 32 -

buttons to select

buttons to select the

buttons to select

Table of Contents