Table of Contents
Advertisement
System Connections
Connecting the TV Antenna
Connect the TV signal source from the aerial to the antenna socket on the rear panel of the unit.
After connecting to the antenna, turn on the unit, and go on with program searching, you can
follow the steps below to select channels:
1. For 1~9 channel:
Press the number buttons to select the channel X, wait several seconds and it will go to the
selected channel.
Or press the number buttons to select channel X, and press the ENTER button to go to the
selected channel immediately.
Or press the number buttons to select channel 0X, and it will go to the selected channel
immediately.
2. For 10~99 channel:
Press the number buttons to select channel XX, wait several seconds and it will go to the selected
channel.
Or press the number buttons to select channel XX, and press the ENTER button to go to the
selected channel immediately.
* X is the channel number.
- 17 -
Advertisement
Table of Contents
