Tv Function; Preparations; Image Setting - LENCO DVT-1941 Manual

TV Function

Preparations

1. After connection, press the POWER button to turn on the power. (If it is turned on, the power
indicator is blue.)
2. Press the SOURCE button to shift to TV mode. You can go on with the following operations:

Image Setting

Note: This item is only available when there is an input signal.
Press the MENU button once to enter the setup
menu. Press the ▲▼ button to select Image and
press the ENTER button to enter the menu
shown on the right.
In the Image setup menu, press the ▲▼ button
to select the desired item. Press the MENU
button to return to the previous menu.
Picture Setup
Press the ▲▼ button to select Picture and
press the ENTER button to enter. Press the ▲▼
button to select the desired item and press the
ENTER button to confirm your selection. Press
the MENU button to return to the previous menu.
Scheme Setup
Press the ▲▼ button to select Scheme and
press the ENTER button to enter. Press the ▲▼
button to select the desired item and press the
ENTER button to confirm your selection. Press
the MENU button to return to the previous menu.
- 18 -