Table of Contents
Advertisement
TV Function
When the VGA signal is connected to the unit, the Advanced setup menu is shown below:
Press the ▲▼ button to select the desired item
and press the ENTER button to enter it's setup
menu. Press the MENU button to return to the
previous menu.
Auto Adjust
If the monitor is not clear, you should carry out "Auto Adjust". Press the ▲▼ button to select Auto
Adjust and press the ENTER button to enter its menu. Press the ▲▼ button to select "Yes" to
activate this function or "No" to cancel. Press the MENU button to return to the previous menu.
Image Pos
Press the ▲▼ button to select Image Pos and press the ENTER button to enter its menu. Within the
menu, press the ▲▼◄► button to move the image. Press the MENU button to return to the previous
menu.
Phase
Press the ▲▼ button to select Phase and press the ◄► button to adjust the value. Press the MENU
button to return to the previous menu.
Clock
Press the ▲▼ button to select Clock and press the ENTER button to enter its menu. Press the ◄►
button to adjust the value. Press the MENU button to return to the previous menu.
Auto Color
Press the ▲▼ button to select Auto Color and press the ENTER button to activate this function.
Press the MENU button to return to the previous menu.
sRGB
Press the ▲▼ button to select sRGB and press the ENTER button to enter its menu. Press the ▲▼
button to select "On" to activate this function or "Off" to cancel. Press the MENU button to return to
the previous menu.
- 20 -
Advertisement
Table of Contents
