Table of Contents
Advertisement
4.
Plug the other end of the power cord into a power outlet.
• Use the enclosed power cord and connect to the standard
power outlet of your country. Be sure to remain within the
rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
• The equipment must be connected to a grounded main
outlet.
Not doing so may result in an electric shock.
5.
Turn on the monitor's power and then switch on the PC's power.
Whenever finished, turn off the PC and the monitor.
• If any image is NOT displayed, refer to "TROUBLESHOOTING" (p.21)
• The monitor automatically enters the power saving mode whenever the graphics
board goes to DVI-DMPM power save mode. To complete power saving, turn off
the Main Power Switch and disconnect the monitor from the power supply while you
don't use the monitor.
Suggestions for Maximizing Comfort
• Adjust brightness of the screen depending on the brightness of your environment.
Too dark or too bright of a screen can cause eye strain.
• Be sure to take adequate rests. A10-minute rest period each hour is suggested.
WARNING
2. CONNECTING UP
17
Advertisement
Table of Contents
