Component Names And Functions - Samsung SCP-2120 User Manual

Warnings & Cautions
Detailed Warnings and Cautions
- Avoid operating the camera for long durations under high temperatures and in high
humidity. Excessive heat can shorten the lifespan of the camera components.
- Do not install or place the camera near any heat sources.
- Subjecting the dome cover to physical shock may damage the camera.
- Do not place the camera facing direct sunlight or other intense light sources. Strong lights
such as spotlights can cause distortions—blooming and smear—as well as discolorations
on the screen by heating up the color filter of the camera. They also may cause internal
reflections of the camera, leading to operational malfunctions.
- Do not drop the camera or subject it to physical shock or vibration; this can cause serious
damage to the camera.
- When installing the camera near a power line, make sure to keep at least 1 meter distance
from the power line, or earth an additional metal pipe to separate the camera from the
power source.
- Install this camera on the ceiling. Installing it on the ground or a unleveled location may
cause product malfunctions and shorten its lifespan.
- This product is designed to be used indoors. When installed outdoors, the camera is
exposed to environmental stress, such as water and high or low temperatures, which may
degrade video quality and/or cause product malfunctions.
- Avoid installing and operating the camera in the following places.
∙ Places whose temperature exceed the camera's recommended range.
∙ Places where drastic temperature changes occur: e.g. Near an air conditioner.
∙ Places that are exposed to steam, oil, and inflammable substances: e.g. Inside a kitchen.
∙ Places that are exposed to radioactivity, X-rays, strong electric waves, and electro-
magnetic waves.
∙ Places that are exposed to outdoor air contaminants: e.g. Dust and car exhaust.
∙ Places in high humidity.
∙ Places that are exposed to corrosive gas
- Smeared and dusty dome covers decrease the picture and video quality. Clean the dome
cover and camera lens on a regular basis.
- Remove the plastic wrap on the dome cover only after the camera installation is complete.
- This camera is not equipped with a power switch. Plug in the camera only after the
installation is complete.
10
SPEED DOME CAMERA User Guide

Component Names and Functions

* Components
Body User Guide
7Pin Terminal Block 8Pin Terminal Block
Screw(M4x20, 4ea) Template
SPEED DOME CAMERA
Mount Braket
BNC Cable
11
User Guide