Exposure; Backlight - Samsung SCP-2120 User Manual

Functional Description

3. Exposure

▶ Main Menu/Camera Setting/Exposure
The Exposure settings are to control the camera's exposure
Main Menu
meter.
Camera Setting
Brightness : Adjusts the screen brightness.
Sequence Setting
P/T Setting
Iris :
OSD Setting
- AUTO : Automatically adjusts the exposure meter.
Alarm Setting
- MANUAL : Enables manual adjustment of the exposure
Initialize
Password Setting
Shutter : Controls the camera's electronic shutter.
Status
- --- : The shutter speed is fixed at 1/60 for NTSC and 1/50
➡
for PAL. Operates when Iris is on the Auto Mode.
- ESC : Adjusts the shutter speed automatically according
Camera Setting
to the screen brightness. Operates when Iris is on
Zoom/Focus
the Manual Mode.
White Balance ATW
- A.FLK : Select this setting when you experience picture
Exposure
flickering. Flickering can happen when artificial
Back Light OFF lighting frequencies clash with camera frame rates.
AGC HIGH - MANUAL : Enables manual adjustment of the shutter
SSNR MEDIUM
SSDR Sens-Up :
- AUTO : Automatically detects light levels and maintains a
Day/Night
clear picture at night or under low-light conditions.
Others
- SENS-UP LIMIT : Adjusts to the maximum-powered zoom
➡
Exposure Notes
Brightness 050
 •  F oroptimalperformanceoftheA.FLKmode,avoid
Iris AUTO
using the mode in conjunction with Backlight.
Shutter ---
 •  W hiletheInternalSyncmodeisineffect,settingthe
Sens-Up AUTO
shutter to '---' and facing the camera directly to a
bright light source may cause poor camera
performance.
 •  S ens-UpisdisabledwhentheshutterisinManualor
A.FLKmode.
42
SPEED DOME CAMERA
(Over 50: Brighter, Under 50: Darker)
meter. (Over 50: Brighter, Under 50: Darker)
speed.
per frame.
User Guide

4. Backlight

4.1 Backlight Mode Settings
▶ Main Menu/Camera Setting/Back Light
Unlike other cameras, Samsung Techwin's unique W-V
Main Menu
DSP chip gives you a clear image of the subject even
Camera Setting with bright backlight.
Sequence Setting
Back Light Mode :
P/T Setting
- OFF : Disables the Backlight mode.
OSD Setting
- HLC : Activates the Highlight Compensation (HLC)
Alarm Setting
mode.
Initialize
Password Setting - BLC : Activates a user defined backlight compensation
Status mode.
➡
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light OFF
AGC HIGH
SSNR MEDIUM
SSDR
Day/Night
Others
SPEED DOME CAMERA
43
User Guide