Samsung SCP-2373 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCP-2373
  6. User manual

Samsung SCP-2373 User Manual

Speed dome camera
Hide thumbs Also See for SCP-2373:
Table of Contents

Advertisement

Quick Links

SPEED DOME CAMERA

User Manual

SCP-2373/SCP-2373H
SCP-2273/SCP-2273H

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCP-2373

Summary of Contents for Samsung SCP-2373

  • Page 1: User Manual

    SPEED DOME CAMERA User Manual SCP-2373/SCP-2373H SCP-2273/SCP-2273H...
  • Page 2 Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Safety Information

    If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock.
  • Page 4 safety information Install it in a place with good ventilation. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor. Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.

  • Page 5: Important Safety Instructions

    important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
  • Page 6 CAUTION These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualifi ed to do so. DETAILED WARNINGS AND CAUTIONS Avoid operating the camera for long durations under high temperatures and in high humidity.
  • Page 7 "Please Check Heater System" If this message appears, turn off the camera and call where you bought. Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s...

  • Page 8: Table Of Contents

    contents Features INTRODUCTION 11 What’s included 12 Component Names and Functions (Indoor Model) 13 Component Names and Functions (Environmental model) 14 Camera Wiring Interface Board CONNECTION & 15 Camera and Appliances Wiring Diagram INSTALLATION 17 How to Set Up Protocols and ID DIP Switches 18 Communication Protocol DIP Switch Settings (SW2) 21 Camera ID DIP Switch Settings (SW1)

  • Page 9: Features

    Versatile protocols and coaxial communication RS-422/485, Coaxial communication methods are supported. RS-422/485 (10 species) : Auto Detected, SAMSUNG-T, SAMSUNG-E, Pelco (D/P), Panasonic, Vicon, Honeywell, AD, GE, BOSCH Coaxial Communications : Pelco Coaxitron (Camera ID DIP switches (SW1) are all positioned to OFF)
  • Page 10 introduction Preset Position Saving and Loading Up to 255 preset positions can be set. Using this function saves and brings up the camera feed of a selected monitoring location. Camera Backup This is to back up the camera’s sequence information and presets. This is useful when the camera or its install base are damaged or malfunctions occur.

  • Page 11: What's Included

    WHAT’S INCLUDED Check if the following items are included in the product package. Applicable Appearance Item Name Quantity Description Model Indoor Model Main Body Environmental Model CD Manual (Optional) Multilingual User Manual User Manual English User Manual If mounting the install base on the Fixing Screw ceiling If determining the installation...

  • Page 12: Component Names And Functions (Indoor Model)

    introduction COMPONENT NAMES AND FUNCTIONS (INDOOR MODEL) Front Back ➊ Install base ❶ Unlock Button ➋ ➋ SW1: ID DIP Switch ➌ SW2: Communication DIP Switch For the DIP switch settings, please refer to the “Installing Your Camera” on Page 17~21. ➌...

  • Page 13: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS(ENVIRONMENTAL MODEL) Front Back ➊ Install base ➋ ➌ ➊ Safety Wire Holder ➋ SW2: Communication DIP Switch ➌ SW1: ID DIP Switch For the DIP switch settings, please refer to the “Installing Your Camera” on Page 17~21. English - 13...

  • Page 14: Connection & Installation

    connection & installation CAMERA WIRING INTERFACE BOARD For the camera wiring, please refer to the picture below. (When using coaxial communication, a separate control signal connection is not required.) Alarm/AUX 2.NC Alarm/ 2.NO AUX Output 2 2.COM Alarm/ Alarm AUX Output 1 Input Alarm Input Communications and Alarm/AUX...

  • Page 15: Camera And Appliances Wiring Diagram

    CAMERA AND APPLIANCES WIRING DIAGRAM Connecting with Samsung Techwin’s “Stand Alone DVR” RS-485 : Camera Stand Alone DVR T(TXD)+ T(TXD)- RS-422 : Camera Stand Alone DVR T(TXD)+ T(TXD)- R(RXD)+ R(TXD)- Connecting with the Samsung Techwin Controller SPC-6000 RS-485 : Camera...
  • Page 16 & installation To connect to Samsung PC DVR RS-485 : Camera PC DVR connection & installation...

  • Page 17: How To Set Up Protocols And Id Dip Switches

    HOW TO SET UP PROTOCOLS AND ID DIP SWITCHES You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment. Remove the install base from the camera body and place the part to be headed to the lower end as shown in the fi...

  • Page 18: Communication Protocol Dip Switch Settings (Sw2)

    Transfer Method (RS-485/422) Settings Response Mode Settings 9~10 Backup Mode Settings 11~12 Termination Settings Protocol Settings Select a communication protocol for the camera. Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4 Auto Detected Samsung-T Samsung-E Pelco-D Pelco-P Panasonic Vicon Honeywell Bosch connection & installation...

  • Page 19: Termination Settings

    Baud Rate Settings Select the transfer speed of a selected communication protocol. Baud Rate (BPS) SW2-#5 SW2-#6 2,400 4,800 9,600 19,200 Communication Method Settings Select a communication method for the camera. Function SW2- #7 Transfer Mode Switch RS-422 (4Wire) RS-485 (2Wire) Communication Response Settings Select a communication response method for the camera and controller: Response or No Response.
  • Page 20 connection & installation Camera Backup Settings These settings are useful when the camera or its install base are damaged or malfunctions occur. When replacing the camera or its install base, you can transfer existing presets and sequence information to the replacement using these settings. Backup Function SW2- #9 SW2- #10...

  • Page 21: Camera Id Dip Switch Settings (Sw1)

    CAMERA ID DIP SWITCH SETTINGS (SW1) Assign a unique number for each camera to identify itself from others. The switch is set to “ID: 1” by default, and 7 switches other than switch 1 are all set to OFF. Each switch has a unique value, and the board ID is the sum of the values of the switches.
  • Page 22 connection & installation Camera ID Chart SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 COAX connection & installation...
  • Page 23 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English - 23...
  • Page 24 connection & installation SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 connection & installation...
  • Page 25 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English - 25...
  • Page 26 connection & installation SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 connection & installation...
  • Page 27 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English - 27...
  • Page 28 connection & installation SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 connection & installation...

  • Page 29: Preparing Adapter And Cables

    PREPARING ADAPTER AND CABLES Power Adapter Power adapter has the capacity of AC24V 2.5A. <Camera Wiring Interface Board>  After connecting the power cable by separating the power connector from the terminal, make the connection between terminal and connector by using a bolt. Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use...

  • Page 30: Product Confi Gurations

    connection & installation PRODUCT CONFIGURATIONS ALARM NETWORK BACKUP ZOOM TELE WIDE VIEW MODE AUDI DVD RECORDER OPEN/CLOSE RETURN RS-485 SRD Series ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN RS-485 SRD Series ALARM NETWORK BACKUP...

  • Page 31: Preparing & Installing Camera Bracket

    PREPARING & INSTALLING CAMERA BRACKET For installation guidelines for brackets and housings, refer to the installation manual that is enclosed with the bracket or housing. ❖ Available Bracket Models Model Item Indoor Model Environmental Model SHP-3701H Outdoor Housing SHP-3701F In-ceiling Housing SBP-300HM3 Hanging Mount SBP-300WM1...

  • Page 32: Optional Accessories For Installation

    connection & installation OPTIONAL ACCESSORIES FOR INSTALLATION For your easier installation, you can purchase appropriate optional accessories available. If installing the camera on the wall Wall mount (SBP-300WM1) Wall mount (SBP-300WM) If installing the camera on the ceiling Ceiling Mount (SBP-300CM) If installing the wall mount (SBP-300WM/SBP-300WM1) on an at least 80mm-long cylinder Pole Mount (SBP-300PM)
  • Page 33 If installing the wall mount (SBP-300WM/SBP-300WM1) on a corner of the wall Corner Mount (SBP-300KM) If installing on a building rooftop Parapet Mount (SBP-300LM) If installing an indoor model outdoors Outdoor Housing (SHP-3701H) If installing an indoor model on the ceiling Flush-Mount Indoor Housing for PTZ Dome Camera (SHP-3701F) If installing an indoor model on the wall mount or ceiling mount...
  • Page 34 connection & installation Bracket Mounting (Indoor Model) Wall mount (SBP-300WM, SBP-300HM3) Wall mount (SBP-300WM1, SBP-300HM3) Ceiling Mount (SBP-300CM, SBP-300HM3) Parapet Mount (SBP-300LM, SBP-300HM3) Bracket Mounting (Environmental Model) Wall mount (SBP-300WM1) Wall mount (SBP-300WM) Ceiling Mount (SBP-300CM) Parapet Mount (SBP-300LM) connection & installation...

  • Page 35: On-Ceiling Mount Type Installation Example

    ON-CEILING MOUNT TYPE INSTALLATION EXAMPLE Attaching the template and installing the install base Attach the provided template on the ceiling. Based on the template, drill a 86mm hole in the ceiling and arrange the wires through the hole. Then, install the install base as shown. Before installing the exposed bracket, open the hinged door at the bottom of the bracket as shown in the picture.
  • Page 36 connection & installation Setting Up Camera DIP Switches DIP switches for communication and ID protocols are located on the bottom of the install base. For the switch settings, refer to the dip switch settings of this manual. Protocol(SW2) ID(SW1) Connecting Camera Safety Cable and Attaching Camera Carefully attach the camera to the mount following the alignment guide marks as shown in the picture.
  • Page 37 ✽ To attach or detach the camera, refer to the picture. * Attaching the camera: As shown in the figure, push up the camera body and turn it in the clockwise direction up to the end. After turning the body fully, fasten the screw on the install base. <Attaching the camera>...

  • Page 38: Example Of Installing An Environmental Model

    connection & installation EXAMPLE OF INSTALLING AN ENVIRONMENTAL MODEL ❖ Fix the installation base with the bracket Fix the base with the bracket by turning it clockwise. As shown in the figure, lightly pull the hinge door handle in the side end of the install base and lay it down.
  • Page 39 Assemble Camera and Installation Base Assemble the installation base and camera by matching the installation direction guides. Attach Camera Turn the camera body installed with the camera in the clockwise direction so that the up, down reference display becomes the same as the image on the right. Secure Camera and Installation Base As shown in the picture below, secure the installation base and camera using 3 hexagon screws.
  • Page 40 connection & installation ❖ Notes for Waterproofing This product is an indoor unit. If it is installed outdoors, use the outdoor housing to make it waterproof.  Installing the unit on the wall by combining the outdoor housing and wall mount Install the wall mount on the vertical wall.
  • Page 41  Installing on the wall by combining the outdoor housing and ceiling mount adapter Wrap the screw part of the housing Concrete ceiling with a sufficient amount of Teflon tape for assembly. Ceiling mount Silicon sealant When separating the dome cover adapter and fastening it to the housing frame, make sure that the gasket is...

  • Page 42: Setup

    setup INTERFACE SYMBOLS Motion Detection Standby/Operation Display : When in standby mode, the “ ” in the upper right of the screen blinks and then changes to “ ” if motion is detected. Alarm Input Port Status Display : “1”, “2”, “3”, “4”, “5”, “6”, “7”, and “8” in the upper right of the screen blink. Current Alarm Port Display According to Input Alarm Ports(Priority) : Only one of “...

  • Page 43: Using And Setting The Menus

    For more detailed information about controls using a third party controller or a DVR, refer to the user’s manual of the product. OSD Commands, Function Chart, and Menu Controls (Applied to Samsung -T/Samsung-E protocol) This camera can be operated using two methods: Using hot keys on its dedicated controller, or accessing the OSD (On Screen Display) on the video output.

  • Page 44: Osd Menu Chart

    setup OSD Menu Chart You can have an overall view of the menu structure. For more information, refer to the applicable page or section in the manual. Zoom/Focus White Balance Exposure Back Light Camera Setting SSNR SSDR Day/Night Preset Others Swing SEQ Group SEQ Sequence Setting...

  • Page 45: Camera Setup

    CAMERA SETUP Zoom and Focus Settings Focus Mode AUTO : Performs continuous auto-focus. MANUAL : Changes the camera mode to Manual Focus. Main Menu ONE SHOT : Auto-focuses the camera once after the Pan, Tilt, or Zoom function is used. Camera Setting Sequence Setting Zoom Tracking...

  • Page 46: White Balance

    setup White Balance The White Balance menu adjusts the balance of the screen colors Main Menu under different lighting conditions. Camera Setting ATW : Adjusts the screen color automatically. Sequence Setting (Color Temperature:1800~10500°K) P/T Setting ATW(IN) : Adjusts the screen color to be optimal in an indoor OSD Setting environment.
  • Page 47 Exposure The Exposure settings are to control the camera’s exposure meter. Main Menu Brightness : Adjusts the screen brightness. Camera Setting (Over 50: Brighter, Under 50: Darker) Sequence Setting P/T Setting Iris AUTO : Automatically adjusts the exposure meter. OSD Setting MANUAL : Enables manual adjustment of the exposure meter.

  • Page 48: Back Light

    Back Light The Backlight function is dedicated to SV-V DSP (SCP-2XX3) chip, Main Menu developed by Samsung Techwin, which, unlike the old models, provides a sharp image of both object and background against a Camera Setting severe counter-light condition.
  • Page 49 HLC Setting When a bright light enters a limited environment such as HLC Setting apartment parking lot entry or gas station entry, this function masks only the bright light so that items such as car license plate Level MEDIUM number can be monitored effectively. Mask Tone HLC is disabled during the daytime.
  • Page 50 setup BLC Setting You can selectively choose a screen area to see objects within the MEDIUM area more clearly than others. Four-direction Joystick Controls : Moving the joystick in all four directions—upward, downward, left, and right—adjusts the location and size of a selected area. 1 + PST : Level Change Zoom Control : : Up : Down...
  • Page 51 SSNR(Samsung Super Noise Reduction) SSNR significantly reduces the amount of low luminance noise. Main Menu OFF : Disables the noise reduction function. Camera Setting LOW : Reduces only a small amount of noise, but generates Sequence Setting almost no afterimage.
  • Page 52 SSDR(Samsung Super Dynamic Range) SSDR illuminates darker spots of an image while retaining the same Main Menu light level for brighter spots to even out the overall brightness of the image with high contrast between bright and dark spots.
  • Page 53 Day/Night The Day/Night function allows the camera to switch between the Main Menu Color and B/W modes. Camera Setting MODE Sequence Setting AUTO : Operates in Color mode most times, and switches P/T Setting to B/W mode if a low light level is detected during OSD Setting nighttime.
  • Page 54 setup Others Sync : Select Internal or Line Lock. INTERNAL : Synchronizes the camera’s output timing to the Main Menu internal crystal. LINE LOCK : Synchronizes the camera’s output timing to Camera Setting the AC adapter power to synchronize multiple Sequence Setting cameras.

  • Page 55: Sequence Setting

    Sequence Setting Preset This function enables the memorization of a selected location and Main Menu activates the Pan, Tilt, and Zoom functions at that location. Saved Camera Setting locations can be recalled using the Preset Execute command. Sequence Setting Setting Up Preset Numbers : P/T Setting Selecting the Preset Setting menu brings up a screen as shown below.
  • Page 56 setup PTZF Setting Preset Setting If you open the PTZF setup menu, you will see the following Preset = 001 (1~255) window. You can use the joystick to select a desired number. 001 : 021 : Select a preset number and press ENTER. You will move to the setup screen.
  • Page 57 Preset Name Setting Using this function, you can add names to preset locations up to 12 characters. Main Menu Once a name is entered, use the joystick and the Enter key to Camera Setting perform the Set command and save the name. Sequence Setting P/T Setting OSD Setting...
  • Page 58 setup Home Position Preset Sets one of the currently configured preset positions as the home Setting position. Edit The Home Position option is the location to move after booting. Home Position Execute Clear Status Execute Preset Recalls a saved preset location. Setting While in Sequence mode operation, the actual movement can Edit...
  • Page 59 Swing SEQ The Swing function commands the camera to move between 2 Main Menu selected locations, monitoring the route. Camera Setting Pan Swing : Sequence Setting Activates the Pan function for the Swing operation. P/T Setting OSD Setting Tilt Swing : Alarm Setting Activates the Tilt function for the Swing operation.
  • Page 60 setup Group SEQ Selecting Group SEQ recalls a group of multiple preset locations in a Main Menu consecutive manner. Up to 6 groups can be defined and up to 128 presets can be memorized for each group. Camera Setting Sequence Setting Setting : P/T Setting Using the joystick,enter desired preset numbers into the PSET...
  • Page 61 Tour SEQ Selecting Tour SEQ recalls groups of preset locations in a Main Menu consecutive manner. Up to 6 groups can be listed for this function. Camera Setting Setting : Sequence Setting Selecting the Settings menu brings up the following screen. P/T Setting Using the joystick, you can enter desired group numbers to the OSD Setting...

  • Page 62: Ptz Trace

    Tour SEQ PTZ Trace Representative Stop saving the Protocol Auto Run Model trace Power On Resume PELCO-D/P KDB300A Ack, Iris Open SAMSUNG-E SSC-5000 OSD ON, Iris Open PANASONIC WV-CU161C OSD ON PTZ Trace VICON V1300X-DVC Iris Open HONEYWELL HTX-3000 Iris Open...
  • Page 63 Auto Run If there is no controller operation by the user for a certain time, the Main Menu sequence operation designated by the user will be executed. Camera Setting Mode : Sequence Setting HOME : Auto run Home Position (Refer to the Preset Menu.) P/T Setting PRESET : Auto run a selected preset number.
  • Page 64 setup Schedule Auto Run Mode SCHEDULE Schedule enables you to schedule a sequencing action by day and time. Time 30SEC Select Day : At Auto Run, select SCHEDULE to set up each day of the week, as shown on the side picture. Select a day, change to ON, and AutoRun Mode Set then press Enter.

  • Page 65: P/T Setting

    P/T Setting Pan/Tilt Limit The moving ranges in the Pan/Tilt directions can be limited. Main Menu Position : Camera Setting Selecting the Position menu brings up the following screen if it is Sequence Setting for the Pan Limit setting. Move the joystick left and right to select P/T Setting a movement range from the starting point to the end.

  • Page 66: Area Setting

    setup Area Setting The Area Setting menu enables selecting certain locations in the course Main Menu of the Pan and Tilt operation, and then display the areas with the OSD (On Screen Display) texts when the camera passes through them. Up to Camera Setting 8 areas can be selected.
  • Page 67 Area Masking If a monitoring location includes a highly private area, the area can be selectively excluded from monitoring. Main Menu Position : SCP-2xx3Series Camera Setting As shown in the picture below, move the joystick to select the upper Sequence Setting left corner and lower right corner of an area.
  • Page 68 setup Prop. P/T This commands the camera to change the Pan and Tilt speed Main Menu automatically according to the current zoom ratio. Moving the joystick clockwise (Tele) slows down and counterclockwise (Wide) Camera Setting accelerates the Pan and Tilt speed, allowing detailed adjustments. Sequence Setting Turning this “Off”...
  • Page 69 Digital Flip Digital Flip is useful to monitor a moving object or a person passing Main Menu directly under the camera. When the object passes straight under the camera, tilting can be Camera Setting traced up to the opposite tilting area without the need of the pan Sequence Setting operation.
  • Page 70 setup Image Hold This will display the preset video in still images until the orientation Main Menu of the camera reaches the preset position at a group or tour movement. Camera Setting This is useful if you want to monitor the video while preventing a Sequence Setting possible visual distraction of the observer.
  • Page 71 Jog Speed You can adjust the speed of the pan or tilt operation. The pan/tilt speed changes according to the tilt of the joystick, or you can control the operation in a fixed speed. MANUAL : Main Menu The pan/tilt speed depends on how much the joystick of the controller is tilted.
  • Page 72 setup Max Speed Level Adjusts the maximum speed of Pan and Tilt while performing the Preset and Sequencing actions. 1~5 : Pan and Tilt operations can be set up to 500°/ sec. Main Menu Camera Setting Preset speed for each level Sequence Setting Level Speed (Unit: º/sec)

  • Page 73: Osd Setting

    OSD SETTING In this menu, you can configure the OSD (On Screen Display) settings. Camera ID : Main Menu Displays or hides Camera ID in the upper left of the screen. Camera Setting Camera Name : Sequence Setting Add a name to the camera. (see the top note on page 74 for P/T Setting more information.) OSD Setting...

  • Page 74: Alarm Setting

    setup XXX Name  When selecting the Camera Name and Preset Name, the screen displays the Left keypad.  Names can be up to 12 characters and can be entered via the joystick and the Enter key. Once a name is entered, use the joystick and the Enter key to perform the Set command and save the name.
  • Page 75 P(Priority) : Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated, the alarm with the highest priority activates before the others. SEQ. : Enables setting up a sequence action for the camera in response to an alarm. You can configure the settings of: HOME/PRESET/SWING/GROUP/TOUR/TRACE/A.PAN/OFF Alarm/AUX Output Main Menu...
  • Page 76 setup  Connecting the power connector and GND incorrectly to the NC/NO and COM ports may cause a short circuit and fi re, damaging the camera.  The max voltage and capacity of the Alarm OUT/AUX OUT ports are 30VDC/2A and 24VAC/2.5A. Operating the camera beyond the capacity may decrease the camera’s lifespan and damage it.

  • Page 77: Initialize

    INITIALIZE Power On Reset : Main Menu Restarts the camera. Camera Setting Factory Default Set : Enables resetting the camera to its factory default settings. When Sequence Setting the mode is selected, all custom data such as preset locations is P/T Setting deleted from the camera.

  • Page 78: Password Setting

    setup PASSWORD SETTING The Password feature enables you to confi gure a password for Main Menu rebooting the camera and accessing the OSD and preventing Camera Setting unauthorized modifi cation of existing camera settings. Sequence Setting On/Off : P/T Setting OSD Setting Enables or disables Password protection.

  • Page 79: Troubleshooting

    troubleshooting TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. Problem Cause and Solution Page ► Check if the camera and peripheral devices are properly connected. 14~16 Controller does not work. ► Verify the setups of ID, protocol, and baud rates. 17~28 ►...

  • Page 80: Troubleshooting

    troubleshooting Problem Cause and Solution Page ► Check the White Balance. ► Adjust Color Menu in Image Adj. Picture’s colors are not good. ► Check if the dome cover or the camera lens is dirty or smudged. If it is, clean the dirt off. ►...
  • Page 81 Problem Cause and Solution Page ► Check the distance between the camera and the monitor. Coxial communication does not ► If the distance between the camera and the monitor exceeds the work. recommended maximum, please use an auxiliary video amp. ►...
  • Page 82 troubleshooting Problem Cause and Solution Page ► Check the Auto Refresh settings. "Auto Refresh" appears and the Auto Refresh optimizes the camera's circuitry and components according camera reboots. to a predefined schedule. “Please Check Heater System” ► The heater may malfunction. Turn off the camera and call where you appears.

  • Page 83: Product Specifications

    PRODUCT SPECIFICATIONS Model SCP-2373H/2273H SCP-2373/2273 1/4” Sony 960H Exview HAD II color CCD Image Device NTSC : 1020(H) x 508(V) Total Pixels PAL : 1020(H) x 596(V) NTSC : 976(H) x 494(V) Effective Pixels PAL :976(H) x 582(V)

  • Page 84: Product Specifi Cations

    Communication Coaxial Control ( SPC-300 Compatible ),RS-485/422 Coax : Pelco-C ( Coaxitron ) Protocol RS-485/422: SAMSUNG-T, SAMSUNG-E, Pelco(D/P), Panasonic, Vicon, Honeywell, AD, GE, BOSCH Operating Temperature -50°C ~ +55°C / Less than 90% RH -10°C~+55°C / Less than 90% RH...

  • Page 85: Dimensions

    DIMENSIONS ❖ Indoor Model Unit: mm (Inches) Ø152(5.98) Ø133.2(5.24) English - 85...
  • Page 86 product specifications ❖ Environmental Model Unit: mm (Inches) 1-1/2 inch PF TAP [Diameter (max) = 47.803mm, Pitch=2.3091mm] Ø220(8.66) product specifications...
  • Page 87 MEMO...
  • Page 88 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Scp-2273Scp-2373hScp-2273h

Table of Contents