Equipment Checklist; Package Contents; Optional Rack-Mounting Equipment - SMC Networks TigerStack II SMC8848M Installation Manual

Equipment Checklist

After unpacking the TigerStack II 10/100/1000 unit, check the contents to
be sure you have received all the components. Then, before beginning the
installation, be sure you have all other necessary installation equipment.

Package Contents

• TigerStack II 10/100/1000 unit (SMC8824M or SMC8848M)
• Four adhesive foot pads
• Bracket Mounting Kit containing two brackets and eight screws for
attaching the brackets to the switch
• Power cord—either US, Continental Europe or UK
• Console cable (RJ-45 to RS-232)
• This Installation Guide
• Installation and Management Guide CD
• SMC Warranty Registration Card—be sure to complete and return to
SMC

Optional Rack-Mounting Equipment

If you plan to rack-mount the switches, be sure to have the following
equipment available:
• Four mounting screws for each device you plan to install in a rack—these
are not included
• A screwdriver (Phillips or flathead, depending on the type of screws used)
E C
QUIPMENT HECKLIST
3-3