Table of Contents
Advertisement
* When set to BPM, the value of each parameter will be set
according to the value of the Master BPM (p. 54) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the time to
twice or four times the time length of the BPM when the set
time is increased).
When setting to BPM, press PARAMETER [
the Master BPM settings screen.
Feedback
This adjusts the feedback amount of the pitch shift sound.
Level
Adjusts the volume.
Direct Level
This adjusts the volume of the direct sound.
OC (Octave)
This adds a note one octave lower, creating a richer sound.
Parameter
Range
Octave Level
Direct Level
Range
This selects the pitch range for the input sound to which you
want to add the effects.
The range to which the affect is applied changes with the
Input Select (p. 19) value.
Guitar
Input
Microphone
Select
USB (Gtr/Mic)
AUX
7th string, open (B) to
Range 1
1st string, 24th fret (E)
7th string, open (B) to
Range 2
1st string, 12th fret (E)
7th string, open (B) to
Range 3
1st string, open (E)
7th string, open (B) to
Range 4
4th string, 2nd fret (E)
Octave Level
This adjusts the volume of the sound one octave below.
Direct Level
Adjusts the volume of the direct sound.
Chapter 4 Introduction to Effects and Parameters
] to display
Value
Range 1–Range 4
0–100
0–100
Bass
USB
Low B, open (B) to
High C, 24th fret (C)
Low B, open (B) to 1st
string, 19th fret (C)
Low B, open (B) to 1st
string, 9th fret (E)
Low B, open (B) to 2nd
string, 2nd fret (E)
PB (Pedal Bend)
This lets you use the pedal to get a pitch bend effect.
The expression pedal automatically switches to the pedal
bend function when PB is selected.
"Setting the External Expression Pedal Functions (Expression
Pedal Function)" (p. 58).
Parameter
Pitch Min
Pitch Max
Pdl Position
Effect Level
Direct Level
Pitch Min
This sets the pitch at the point where the expression pedal is
fully lifted.
Pitch Max
This sets the pitch at the point where the expression pedal is
all the way down.
Pdl Position (Pedal Position)
This adjusts the pedal position for pedal bend.
Effect Level
This adjusts the volume of the pitch bend sound.
Direct Level
Adjusts the volume of the direct sound.
2CE (2x2 Chorus)
Two separate stereo chorus units are used for the low-
frequency and high-frequency ranges in order to create a
more natural chorus sound.
Parameter
Xover f
Lo Rate
Lo Depth
Lo PreDly
Lo Level
Hi Rate
Hi Depth
Hi PreDly
Hi Level
Value
-24–+24
-24–+24
0–100
0–100
0–100
Value
100 Hz–4.00 kHz
0–100, BPM
–BPM
0–100
0.0 msec–40.0 msec
0–100
0–100, BPM
–BPM
0–100
0.0 msec–40.0 msec
0–100
45
Advertisement
Table of Contents
