Turning Each Of The Effects In A Patch On And Off; About The Information Appearing In The Display; If The Patch Does Not Switch; Turning Off The Power - Boss GT-6B Owner's Manual

Turning Each of the Effects in a
Patch On and Off
You can use pedals 1–4 to switch on and off the individual
effects that are used in a patch. Each pedal shows the names
of two effects; the effect that you are currently able to switch
on and off is indicated in the lower row of the right display.
You can also change these with [PEDAL ASSIGN] (p. 45).
Switching Patches by Specifying the Bank
and Number
The GT-6B has been set at the factory so that you can
switch patches using the PATCH/VALUE dial or the
PATCH and PATCH
the settings by switching patches directly with the bank
and number. For more detailed information, refer to p. 60.
About the Information Appearing
in the Display
The following information is shown in the display.
fig.01-11
Number
Bank

If the Patch Does Not Switch

On the GT-6B, you cannot switch patches in any screen other
than the Play screen. If you are having this problem, press
[EXIT] to return to the Play screen.
pedals, but you can change
Patch Name
Effects
Chapter 1 Playing Sounds

Turning Off the Power

1. Before turning off the power, confirm the following.
• Is the volume on the GT-6B, your amp, and all other
connected devices turned down to the minimum level?
2. Turn off the power of the bass amp (power amp) and
other devices.
3. Turn the GT-6B's power off.
15