Table of Contents
Advertisement
1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS
The graphic display on the touch panel shows the
1
status of the copier. When one of the graphic symbols
flashes, take the appropriate action referring to the
page shown.
2
3
4
CHECK ORIGINALS
Flashes when an original misfeed occurs inside
the reversing automatic document feeder
5
(optional).
BYPASS MISFEED
Flashes when a sheet of paper fails to be fed into
6
the copier during bypass copying.
REPLACE TONER CARTRIDGE
Flashes when the toner cartridge runs out of toner.
7
Page 9-5
PAPER PATH MISFEED
Flashes when a paper misfeed occurs on the
8
paper path inside the copier.
LARGE-CAPACITY FEEDER MISFEED
Flashes when paper fed from the large-capacity
9
feeder (optional) is misfed.
DRAWER MISFEED
Flashes when paper fed from one of the drawers
10
is misfed.
STACK
Flashes when sheets of paper copied on one
11
side are stacked in the automatic duplexer
(optional) during duplex copying (this flashing
does not indicate a paper jam). This symbol also
flashes when sheets of paper are left in the
duplexer. In this case, remove the paper from
12
the duplexer.
9-2
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
symbol
Page 9-9
symbol
Page 9-12
symbol
Page 9-12
Page 9-11
symbol
Page 9-10
symbol
Page 9-16
DUPLEXER MISFEED
Flashes when a paper misfeed occurs inside the
automatic duplexer (optional).
TRANSFER BELT MISFEED
Flashes when a misfeed occurs on the transfer
belt.
Page 9-13
SADDLE STITCH UNIT MISFEED
symbol
Flashes when a paper misfeed occurs inside the
saddle stitching unit.
FUSER MISFEED
Flashes when a paper misfeed occurs in the fuser
unit.
Page 9-14
FINISHER/PUNCH UNIT MISFEED
Flashes when a paper misfeed occurs inside the
symbol
finisher (optional) or the hole punch unit (optional).
Page 9-17, 9-18
CALL SERVICE
Flashes when inspection and maintenance by a
service technician become necessary.
Page 9-28
symbol
Page 9-15
symbol
symbol
Page 9-19
symbol
symbol
symbol
Advertisement
Table of Contents
