Table of Contents
Advertisement
3. ABOUT THE SETTING BEFORE SCANNING (Cont.)
4
Set your scan user name.
1
- Press the area
right to switch to the scan user name input screen.
2
3
5
Enter the scan user name within 32 letters using the
alphabet (touch panel) and numbers (digital keys), then
4
press the SET key.
- Use the following keys as required.
5
Backspace ...Press this key to delete a letter before the cursor.
Space
Cancel
6
C Clear (control panel)...Press this key to delete all letters.
6
Key in the password you want to register (the same
7
number in 5 digits) in both 'Password' area and
'Verify' area.
8
9
7
Press the SET key after the entry of the scan user
name and password.
10
- The new scan user name is registered.
11
12
8-28
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
as shown on the screen on the
...Press these keys to move the cursor.
...Press this key to enter a space.
...Press this key to cancel entry of letters and
go back to the screen in step 4.
Advertisement
Table of Contents
