Mounting The Display Unit - Raymarine L1250DRC Owner's Handbook Manual

2-12

2.5 Mounting the Display Unit

The HD Series LCD display unit is waterproof to CFR46 and can be installed
either above or below deck. The display unit can be mounted using the
mounting bracket supplied or console mounted using the optional flush-
mounting kit (see Section 2.2).
Mounting Bracket
The display unit can be mounted on a dash, chart table, bulkhead, or deckhead.
Figure 2-6:
1. Loosen the knobs and remove the mounting bracket from the display unit.
2. Mark the locations of the mounting bracket screw holes on the mounting
surface.
3. Use the screws supplied to attach the mounting bracket at the marked loca-
tions.
4. Attach the display unit to the mounting bracket, adjust the display angle,
and tighten the knobs.
Console Mounting
The display unit can be console mounted if desired, using the optional flush-
mounting kit (Raymarine part number M92708 for 7" Fishfinder displays and
E55033 for 10.4" Fishfinder displays).
LCD Display Mounting
HD Series Fishfinders
D4848-1