Controlling The Display; Selecting The Mode Of Operation - Raymarine L1250DRC Owner's Handbook Manual

5-4

5.2 Controlling the Display

You control the display using the cursor and control keys. You start all
operations from the default screen, that is the default soft keys are displayed:
Fishfinder
FREQUENCY
Chart
ROUTE
When you have completed an action using the soft keys, press ENTER or
CLEAR to return to the default screen. You may need to press ENTER or
CLEAR several times to back-track through the soft key hierarchy.
Note: If you have set up your system so that the default soft keys are not dis-
played all the time, press any soft key to display the labels.
The remainder of this section describes how to select the mode of operation
and switch half-screen windows on/off. The following sections describe how
to set up the display for the Fishfinder and for the Chart (for fishfinder displays
with chartplotter functionality).
The controls are summarized in the laminated Quick Reference cards
that accompany this handbook.

Selecting the Mode of Operation

If the data is available on your system, the following display modes can be
selected:
• Sonar (Fishfinder)
• Chart
• Radar
• Data Log
You use the DISPLAY key to select the full-screen display mode. The
DISPLAY key also accesses the soft keys for the half-screen window options
for additional information.
➤ To select the mode:
1. Press the DISPLAY key.
DISPLAY
The DISPLAY pop-up appears, as shown in Figure 5-1.
ZOOM BTM.LOCK
GOTO SCREEN
HD Series Fishfinders
A-SCOPE
D5010-1
FIND SHIP
D4160-1