Stop Follow Or Stop Goto - Raymarine L1250DRC Owner's Handbook Manual

7-34
2. Press the GOTO WAYPOINT soft key.
GOTO
WAYPOINT Navigation to the selected waypoint begins. The soft key STOP GOTO is dis-
played.
3. To return to the default soft key display, move the cursor away from the
waypoint or press ENTER or CLEAR.
➤ To navigate directly to the cursor position:
1. Use the trackpad to position the cursor as desired.
2. Press the GOTO default soft key, followed by GOTO CURSOR.
GOTO
If navigation is currently in progress you are warned "Already following
route. Cancel route and goto cursor?".
GOTO To cancel the GOTO CURSOR operation, press NO.
CURSOR
To continue with the GOTO CURSOR operation (and stop the current GOTO
ROUTE), press YES.
The chartplotter places a temporary waypoint as the target and starts to
navigate towards it. The waypoint is shown as a square with a circle and
dot in the center and is connected to the vessel's starting position with a
dashed line.
The soft key STOP GOTO is displayed.
STOP
GOTO
Note: The temporary waypoint is not added to the waypoint list. When the
GOTO
3. To return to the default soft key display, move the cursor away from the
waypoint or press ENTER or CLEAR.

Stop Follow or Stop Goto

➤ To stop following the route or target point:
If necessary, press the GOTO soft key, then press the STOP GOTO/FOLLOW soft
GOTO
key.
STOP
GOTO
or
Move the cursor over any waypoint or leg in the current route, then press the
STOP
FOLLOW
STOP GOTO/FOLLOW soft key.
The dotted line from your vessel to the target waypoint disappears.
is complete or is stopped, the temporary waypoint is erased.
HD Series Fishfinders