Pioneer DVD-V8000 Operating Instructions Manual page 65

2.1.1 Inputting commands for subtitle, audio, and
angle
Example: To set SUBTITLE 1, AUDIO 2, and ANGLE 3 (com-
mand to set subtitle, audio and angle without perform-
ing search operations).
1) Without entering [TITLE], [SEARCH FRAME],
or [MARK FRAME], place cursor over
[SUBTITLE] and press numeral button [1],
followed by the ENTER or « button.
2) With the cursor over [AUDIO], press numeral
button [2] followed by the ENTER or « button.
3) With the cursor over [ANGLE], press numeral
button [3] followed by the ENTER or « button.
4) With the cursor over [OK], press the ENTER
button.
¶ Setting is completed.
Command Stack
Group(1-001) Command(0-000)
Group001 001
TITLE
002
SEARCH FRAME
003
004
SUBTITLE
005
AUDIO
006 ANGLE
007
008
Move Select ENTER
2.2 Inputting CHAPTER PLAY commands
Example: To play chapters 3 to 7 of title 5, using SUBTI-
TLE 3, AUDIO 2, and ANGLE 1.
1) With the cursor over [CHAPTER PLAY], press the
ENTER button.
Command Stack
Group(1-001) Command(0-000)
Group001 001
SEGMENT PLAY
002
CHAPTER PLAY
003
COMMAND
004
005
006
007
008
Move Select ENTER
2) With the cursor over [TITLE], press numeral
button [5], followed by the ENTER or « button.
3) With the cursor over [SEARCH CHAPTER], press
numeral button [3], followed by the ENTER or «
button.
4) With the cursor over [MARK CHAPTER], press
numeral button [8], followed by the ENTER or
« button.
¶ If [7] is selected, chapter 7 itself will not be played back.
00
000000
01
2
3
OK CANCEL
Return RETURN Exit SETUP
Return RETURN Exit SETUP
Function for Commercial Use
5) With the cursor over [SUBTITLE], press
numeral button [3], followed by the ENTER or
« button.
6) With the cursor over [AUDIO], press numeral
button [2], followed by the ENTER or «
button.
7) With the cursor over [ANGLE], press numeral
button [1], followed by the ENTER or «
button.
8) With the cursor over [OK], press the ENTER
button.
¶ Setting is completed.
Command Stack
Group(1-001) Command(0-000)
Group001 001
TITLE
002
SEARCH CHAPTER
003
MARK CHAPTER
004
SUBTITLE
005
AUDIO
006 ANGLE
007
008
Move Select ENTER
2.3 Inputting other commands
1) With the cursor over [COMMAND], press the
ENTER button.
Command Stack
Group(1-001) Command(0-000)
Group001 001
SEGMENT PLAY
002
CHAPTER PLAY
003
COMMAND
004
005
006
007
008
Move Select ENTER
2.3.1 Single commands
1) Highlight the desired command (e.g., [PLAY]),
and press the ENTER button.
¶ Setting is completed.
¶ Other commands, such as [PAUSE], [STOP], [STEP
REV], [STEP FWD], and [REPEAT] can be input in the
same way.
Command Stack
Group(1-001) Command(0-000)
Group001 001
PLAY
002
STEP REV
003
WAIT
004
REPEAT
005
GO TO GROUP
006 PASS THROUGH
007 PASS THROUGH KEY
DIVIDE GROUP
008
MERGE GROUP
Move Select ENTER
07
05
03
08
03
2
1
OK CANCEL
Return RETURN Exit SETUP
Return RETURN Exit SETUP
PAUSE STOP
STEP FWD
000 sec.
000
Return RETURN Exit SETUP
65