Dvi Connections; Resolution]; Images - Pioneer DVD-V8000 Operating Instructions Manual

04 Initial Settings

DVI connections

Select the image resolution, aspect ratio and image quality
levels to match the device used through a DVI connection.
1. Press the SETUP button to open the
SETUP menu, then use the cursor
buttons (», «, |, \) to select [Initial
Settings] and press the ENTER button
.
(page 39)
2. Use the down cursor button («) to select
[Options].
Initial Settings
Digital Audio Out Parental Lock
Video Output DVI Settings
Language
Display
Options
3. Use the cursor buttons (», «, |, \) to
select [DVI Settings].
Initial Settings
Digital Audio Out Parental Lock
Video Output DVI Settings
Language
Display
Options
Important
¶ Cannot be selected when DVI device is not connected.
4. Use the cursor buttons (», «, |, \) to
select and set items, and then press the
ENTER button to confirm the selection.
48
Off (us)
Off (us)
DVD-V8000 digital video signals (complies with EIA/CEA-861-B)
Vertical frequency
Resolution
VGA
480i
NTSC 480p
720p
1080i
576i
576p
PAL
720p
1080i

[Resolution]

Use to select the image resolution of the DVI output.
Use the cursor buttons (|, \) to select
resolution, and press the ENTER button
to confirm.
This Pioneer logo will only be displayed when connecting
to a Pioneer device.
Resolution
Aspect Ratio
Video Memory
¶ Select image resolution from the following:
• VGA (640 x 480 pixel) progressive-scan image
• 720 x 480 pixel progressive-scan image
• 720 x 480 pixel interlace-scan image
• 720 x 576 pixel progressive-scan image
• 720 x 576 pixel interlace image
• 1280 x 720 pixel progressive-scan image
• 1920 x 1080 pixel interlace-scan image
¶ After setting a new resolution, a confirmation message
will be displayed. Confirm the selection once more after
reading this message.
¶ If image is not correctly displayed after changing the reso-
lution, hold the remote control unit's [0] button depressed
for 5 or more seconds to reset resolution to the value au-
tomatically set when the device was first connected to
this player.
Note
¶ The 720 x 576 pixel progressive/interlace image is
selectable only when playing a PAL disc. Also, the VGA or
720 x 480 pixel progressive/interlace image is selectable
only when playing a NTSC disc.
¶ The display image may appear rough or output may be tem-
porarily interrupted during switching of image resolution.
Horizontal frequency
(Hz) (kHz)
59.940 31.469
59.940 15.734
59.940 31.469
59.939 44.955
59.939 33.716
50.000 15.625
50.000 31.250
50.000 37.500
50.000 28.125
720 x 480P
16 : 9 (Wide)
Direct
Clock frequency
(MHz)
25.175
27.000
27.000
74.175
74.175
27.000
27.000
74.250
74.250