Registering The Subscreen Image (Subscreen Input) - Pentax Optio W90 Operating Manual

Registering the Subscreen Image
(Subscreen Input)
You can choose the subscreen image displayed on the upper-left corner
of the display.
• One of the 3 pre-installed screens
• One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select D
(Subscreen Input).
3
Press the 4 button.
The image selection screen appears.
4
Use the four-way controller
(45) to choose the image for
7
the subscreen.
Only images suitable for the
subscreen are displayed. You can
also choose one of the 3 pre-installed
screens already stored in the camera.
5
Press the 4 button.
The subscreen image is set.
Once the subscreen image has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card is formatted.
256
Subscreen Input
S e t t o d i s p l a y t h e
s e l e c t e d i m a g e o n
s h o o t i n g s c r e e n
Cancel
MENU
MENU Cancel Cancel Cancel
1 / 2
OK OK
100 - 0017 100 - 0017
100 0017
OK OK OK OK