Changing The Start-Up Screen - Pentax Optio W90 Operating Manual

Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
• One of the 3 pre-installed screens
• One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select ^ (Start-
up Screen).
3
Press the 4 button.
The image selection screen appears.
4
Use the four-way controller
(45) to choose the image for
the start-up screen.
Only images suitable for the start-up
screen are displayed. You can also
choose one of the 3 pre-installed
screens or the Guide Display Start-up
Screen already stored in the camera.
5
Press the 4 button.
The setting is saved.
Start-up Screen
F o r s e t t i n g a c a p t u r e d
i m a g e a s t h e S t a r t - u p
S c r e e n
Cancel
MENU
MENU MENU MENU Cancel Cancel Cancel
2 / 2
OK OK
100 - 0017 100 - 0017
100 0017
7
OK OK OK OK OK OK
257