Setting The Digital Blur Removal Function - Pentax Optio RS1000 Operating Manual

6
Press the 3 button.
The camera returns to capture status.
• When set to 9 (Green) or C (Movie) mode, only Auto (sensitivity 100
- 800) is available.
• When set to c (Digital SR) mode, only Auto (sensitivity 100 - 6400)
is available.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.104).
Saving the sensitivity setting 1p.110
3

Setting the Digital Blur Removal Function

If you set Digital Blur Removal to O (On), the camera electronically
removes the blur in the images you take. The default setting is P (Off).
• Use the Movie SR function (p.109) to correct camera shake in C
(Movie) mode.
• If you use the Digital Blur Removal function, the picture may taken with
higher sensitivity than the sensitivity you selected in the [Sensitivity]
setting of the [A Rec. Mode] menu.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Digital Blur
Removal].
3
Use the four-way controller (45)
to select O or P.
O
P
4
Press the 3 button.
The camera returns to capture status.
One of the following icons appears on the display.
102
Removes the blur.
Does not remove the blur.
Rec. Mode 2/2
Shadow Correction
Digital Blur Removal
Digital Zoom
Memory
Green Button
Date Imprint Off
Exit
MENU