Pentax Optio RS1000 Operating Manual page 99

2
Use the four-way controller (23) to select [Recorded
Pixels].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the number of recorded
pixels.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
• The number of recorded pixels for images captured in 9 (Green)
mode is fixed at W.
• The number of recorded pixels for images captured in C (Half-length
Portrait) or N (Frame Composite) is fixed at h.
• If you exit the F (Digital Panorama) mode after taking the first frame,
the number of recorded pixels for the captured image is fixed at i
(1600x1200).
• The number of recorded pixels for images captured with I (16-frame
shooting) is fixed at m for one frame and f (2560×1920) for one
image.
• If you change the [Recorded Pixels] setting frequently, you can save
time by assigning it to the Green button (p.104).
Recordable Image No.
Recorded Pixels
14
M
White Balance
10
M
Focusing Area
7
M
Sensitivity
2
M
EV Compensation
640
Movie
Cancel
MENU
12
3
OK
OK
97