Configuring the Printer Driver Settings
Windows 98/Me
8.
Spool Settings...
Specify the method of sending (spooling) documents from the program to the printer.
• Spool Data Format
Select spool data type (EMF format or RAW format). Specifying RAW format results in a longer time
elapsing before an application becomes operational after printing from it.
Note: Spooling by EMF format (enhanced metafile compression) may cause the following problems on
some application software.
1) Printing result is different from the screen display.
2) Printing requires excessive time.
• Enable bidirectional support
Be sure to check the check box for "Enable bidirectional support" when installing the status monitor.
Otherwise, status information reception may not function properly.
9.
Port Settings...
Modifies printer port settings.
28
button
button