Setting Preset Stations Automatically; Selecting The Preset Channels; Using Fm/Am Outdoor Antenna (Optional) - Panasonic SC-PTX7 Operating Instructions Manual

Setting preset stations automatically

Up to 30 stations can be set in each band, FM and AM.
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
1
Press [TUNER/BAND]
2
Press [6 5] to select the lowest frequency
(FM: 87.9 or 87.5, AM: 520).
3
Press [SUB MENU].
4
Press [3 4] to select "Auto Memory" and press
[ENTER].
5
Press [2 1] to select "Yes" and press [ENTER].
The tuner presets all the stations it can receive into the
channels in ascending order.
≥"Auto Memory Completed." is displayed when the
stations are set, and the radio tunes to the last preset
station.
≥"Memory setting failed." is displayed when automatic
preset is unsuccessful. Preset the channels manually
(➜ page 62).
To return to the previous screen
Press [RETURN].

Selecting the preset channels

1
Press [TUNER/BAND]
2
Press the numbered buttons to select the channel.
≥To select a 2-digit number
e.g., "12": [S10] ➜ [1] ➜ [2].
PL PRG DISC SFC TG
D DTS
MODE
CD
RDS
DVD
PTY PS A AC
Alternatively, press [: 9]
∫ Making selections with the on-screen
display
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
§1
1 Press [TUNER/BAND]
2 Press [TOP MENU].
3 Press [3 4] to select the preset channel and press
[ENTER].
To erase unnecessary preset channels
Unnecessary preset channels that have been erased will not
be displayed when selecting channels with [: 9]
§1
to select "FM" or "AM".
FM Auto Memory
Do you want to start Auto Memory?
Start point : XX.X MHz?
Yes No
§1
to select "FM" or "AM".
D.MIX MONO SLP ST CT SRD E.
HDCD
H.BASS
PGM
W
RND 1 2
§2
to select the channel.
to select "FM" or "AM".
§2
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
1 Press [TUNER/BAND]
2 Press [SUB MENU].
3 Press [3 4] to select "Erase Preset Channel" and press
[ENTER].
4 Press [3 4] to select the unnecessary channel and press
[ENTER].

Using FM/AM outdoor antenna (optional)

Use outdoor antennas if FM/AM radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
AM outdoor antenna
[Using a vinyl wire (not included)]
Run a piece of vinyl wire horizontally across a window
or other convenient location.
75 ≠ coaxial
cable
(not included)
Antenna plug
(not included)
FM outdoor antenna
[Using a television antenna (not included)]
≥Disconnect the FM indoor antenna.
≥The antenna should be installed by a competent
technician.
.
§1
to select "FM" or "AM".
5 to 12 m
(16 to 39 feet)
Leave the AM loop
antenna
connected.
TV IN AUX
L L
EXT
P
LOOP
R
R R
AM
ANT
FM
LOOP ANT GND
ANT
75
LAN
(10BASE-T/
100BASE-TX)
63