Using Operation Bar - Panasonic KX-HCM250 Operating Instructions Manual

Operating Instructions

3.3.1 Using Operation Bar

Operation bar controls the general use of Network Camera. The following sections
describe the general way of using it.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
46
(1) End Display: When Pan/Tilt operation has reached the
end of corner, Left End, Right End, Up End or Down
End appears.
Locked Display: Pan/Tilt/Preset, Brightness Control and
Preset program can be locked. Locked appears when the
operation bar is clicked.
Preset Display: Preset name appears when clicking
Preset Button.
(2) Pan/Tilt Scan, Pan/Tilt and Home Position:
Refer to page 47.
(3) Preset Buttons: Refer to page 48.
(4) Brightness: Brightness control has nine steps including
[STD] (Standard). Clicking [-] and [+] buttons changes the
brightness of image. Brightness can be locked on Camera
Setup window on page 82.
(5) Resolution: [640 x 480], [320 x 240] (default) or [160 x
120]
(6) Image Quality: [Favor Clarity] optimizes the image for
good clarity. [Standard] keeps the standard quality.
[Favor Motion] optimizes the image for motion display.
(7) Image Size: The default image size is x 1. [x 1.5] expands
only the size. The resolution does not change.
(8) Buffered Image: [Start Capture] starts buffering the
image. [Viewer] links to the Buffered Image screen on
page 50. Each button changes to [Primary] and
[Secondary] button when using Image Transfer feature.
(9) Link Buttons: Each buttons link to Multi-Camera screen,
Top Page and Help Page.