Wireless Setup - Panasonic KX-HCM250 Operating Instructions Manual

Operating Instructions

2.7 Wireless Setup

To access Network window
1.
Enter "http://IP Address (or URL) :Port No./config.html" on the web browser
and press [Enter]. Setup Page appears. Refer to page 54 for the detail of
Setup Page.
• When port number is 80 (default), you do not need to enter port number.
2.
Click [Network] on Setup Page.
To set up the wireless network parameters
Set SSID (ESSID) and Encryption (WEP) setting of the wireless router to
Network Camera in Infrastructure mode and AdHoc mode. AdHoc mode requires
you to set channel additionally. Ask the administrator for SSID and Encryption
settings. Follow the steps on the next pages.
a)
[Status] displays the detail of the wireless network conditions on Wireless
window. Those conditions are useful to decide where to install Network
Camera. Wireless window refreshes every 10 seconds.
* Refer to the next page for the connection and signal strength status.
1
32
MAC address of wireless router is
displayed in Infrastructure mode.
BSSID is automatically generated from
SSID in AdHoc mode.
Connected channel
Speed of the data communication
1
* Status of the data communication between
Network Camera and wireless router
1
* Signal Strength condition between Network
Camera and wireless router.
Wireless Software version no. It is
different from Setup Page version no.
a)
1.
2.
3.
4.