Panasonic KX-HCM250 Operating Instructions Manual page 118

Operating Instructions
Problem
When Top Page
does not
appear.
When forgetting
the IP address
of the Network
Camera.
When forgetting
the password to
access Setup
Page.
Indicator does
not light up.
Indicator is
orange.
118
About Network Camera Setup
• Enter the correct IP address in the web browser.
• IP address and Subnet Mask of the PC and the Network
Camera must be in the same class of the private IP address on
the LAN. Refer to page 25.
• The network congestion prevents Top Page from appearing
quickly. Wait for a while.
• A proxy server may prevent you from connecting directly to
Network Camera, set up not to use the proxy server. Refer to
page 26 for details.
• When Top Page does not appear, port number 80 might not be
available. Ask your ISP for the available port number.
• When you use DDNS, you need to set Default Gateway and
DNS server address. Refer to page 58 for Network window.
• If Top Page does not appear in the above procedure, press the
CLEAR SETTING button and set up with the Setup CD-ROM
again.
• The procedure on page 123 can be established if Network
Camera has a defect.
Check an IP address by using the Setup CD-ROM. Network
Camera List window on page 29 can tell you the IP address of
Network Camera.
Follow the steps below.
1.
Initialize Network Camera by pressing the CLEAR SETTING
button.
2.
Reconfigure Network Camera.
• Confirm that the standard AC adaptor PSLP1233 (Order No.
PSLP1233Z) is used.
• Confirm that the Indicator Control is disabled. Refer to page 88
for Indicator Control window.
• Ethernet cable is not connected properly.
• PC, Ethernet hub or broadband router is not working.
Cause and Remedy