Using The Pjlink™ Protocol - Panasonic PT-D10000 Operating Instructions Manual

Using the PJLink™ protocol
The network functions of this projector are compatible with PJLink™ Class 1, and so the PJLink™ protocol can be
used to carry out the following operations from a computer.
• Projector settings
• Querying the projector status
Supported commands
The following table lists the PJLink™ protocol commands that can be used to control the projector.
Command Command
POWR POWR Power supply control Power supply control
POWR ? POWR ? Power supply status query Power supply status query
INPT INPT Input selection Input selection
INPT ? INPT ? Input selection query Input selection query
AVMT AVMT Shutter control Shutter control
AVMT ? AVMT ? Shutter mode query Shutter mode query
ERST? ERST? Error status query Error status query
LAMP ? LAMP ? Lamp status query Lamp status query
INST ? INST ? Input selection list query Input selection list query
NAME ? NAME ? Projector name query Projector name query
INF1 ? INF1 ? Manufacturer name query Manufacturer name query
INF2 ? INF2 ? Model name query Model name query
INFO ? INFO ? Other information query Other information query
CLSS ? CLSS ? Class information query Class information query
■
PJLink™ security authorization
The password used for PJLink™ is the same as the password which has been set for web browser control. If
you would like to use PJLink™ without authorization being used, leave the password for web browser control
blank.
• PJLink™ is a pending trademark in Japan, the United States and other countries and regions.
For details on PJLink™ specifications, refer to the Japan Business Machine and Information System
Industries Association website. The URL is http://pjlink.jbmia.or.jp/english/
98
– ENGLISH
Control details Control details
Parameters Parameters
0 = Standby 0 = Standby
1 = Power ON 1 = Power ON
Parameters Parameters
0 = Standby 0 = Standby
2 = Cool-down in progress 3 = Warm-up in progress 2 = Cool-down in progress 3 = Warm-up in progress
Parameters Parameters
11 = RGB1 11 = RGB1
21 = VIDEO 21 = VIDEO
31 = DVI-D 31 = DVI-D
32 = AUX (only enabled if ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 is 32 = AUX (only enabled if ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 is
installed) installed)
Parameters Parameters
30 = Shutter mode off (picture mute cancelled) 30 = Shutter mode off (picture mute cancelled)
31 = Shutter mode on (picture mute) 31 = Shutter mode on (picture mute)
Parameters Parameters
1st byte: 1st byte:
2nd byte: 2nd byte:
3rd byte: 3rd byte:
4th byte: 4th byte:
5th byte: 5th byte:
6th byte: Indicates other errors, range 0--2 6th byte: Indicates other errors, range 0--2
Definitions for each value from 0 to 2 are as follows. Definitions for each value from 0 to 2 are as follows.
0 = No error known 0 = No error known
Parameters Parameters
1st digits (1--5 digits): Lamp 1 cumulative operating time 1st digits (1--5 digits): Lamp 1 cumulative operating time
2nd digit: 0 = Lamp 1 off, 1 = Lamp 1 on 2nd digit: 0 = Lamp 1 off, 1 = Lamp 1 on
3rd digits (1--5 digits): Lamp 2 cumulative operating time 3rd digits (1--5 digits): Lamp 2 cumulative operating time
4th digit: 0 = Lamp 2 off, 1 = Lamp 2 on 4th digit: 0 = Lamp 2 off, 1 = Lamp 2 on
5th digits (1--5 digits): Lamp 3 cumulative operating time 5th digits (1--5 digits): Lamp 3 cumulative operating time
6th digit: 0 = Lamp 3 off, 1 = Lamp 1 on 6th digit: 0 = Lamp 3 off, 1 = Lamp 1 on
7th digits (1--5 digits): Lamp 4 cumulative operating time 7th digits (1--5 digits): Lamp 4 cumulative operating time
8th digit: 0 = Lamp 4 off, 1 = Lamp 2 on 8th digit: 0 = Lamp 4 off, 1 = Lamp 2 on
The following are returned as parameters. The following are returned as parameters.
"11 12 21 22 31" (If any of the ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 are "11 12 21 22 31" (If any of the ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 are
installed, "11 12 31 22 31 32" is returned.) installed, "11 12 31 22 31 32" is returned.)
The name set for "HOST NAME" in "NETWORK" is returned. The name set for "HOST NAME" in "NETWORK" is returned.
"Panasonic" is returned. "Panasonic" is returned.
"D10000" or "DW10000" is returned. "D10000" or "DW10000" is returned.
Information such as version number is returned. Information such as version number is returned.
"1" is returned. "1" is returned.
Notes Notes
1 = Power ON 1 = Power ON
12 =RGB2 12 =RGB2
22 = S-VIDEO 22 = S-VIDEO
Indicates fan errors, range 0--2 Indicates fan errors, range 0--2
Indicates lamp errors, range 0--2 Indicates lamp errors, range 0--2
Indicates temperature errors, range 0--2 Indicates temperature errors, range 0--2
Fixed at 0 Fixed at 0
Indicates filter errors, range 0--2 Indicates filter errors, range 0--2
1 = Warning 1 = Warning 2 = Error 2 = Error