Panasonic PT-D10000 Operating Instructions Manual page 77

Direction
The fan is controlled in accordance with the setup
angle.
1. Press ▲▼ to select
"DIRECTION".
OPTION2 OPTION2
PROJECTOR ID PROJECTOR ID
INSTALLATION INSTALLATION
ALTITUDE ALTITUDE
DIRECTION DIRECTION
LAMP SELECT LAMP SELECT
LAMP RELAY LAMP RELAY
RS-232C RS-232C
SYSTEM INFORMATION SYSTEM INFORMATION
AIR FILTER CLEANING AIR FILTER CLEANING
DATE AND TIME DATE AND TIME
STARTUP LOGO STARTUP LOGO
PASSWORD PASSWORD
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch
"DIRECTION".
• The setting will change as follows each time
◄► is pressed.
H
• H (HORIZONTAL):
This is the standard setup.
• V (VERTICAL):
Select this if the projector is tilted at a large
vertical angle (an angle which exceeds 30° from
the horizontal).
2 2
FRONT-F FRONT-F
LOW LOW
H H
QUAD QUAD
OFF OFF
LOGO1 LOGO1
V
Output resolution
(PT-D10000U only)
Pictures projected onto a screen (for SXGA) with
a 5:4 aspect ratio can be displayed with the SXGA
resolution.
1. Press ▲▼ to select "OUTPUT
RESOLUTION".
OPTION2 OPTION2
PROJECTOR ID PROJECTOR ID
INSTALLATION INSTALLATION
ALTITUDE ALTITUDE
DIRECTION DIRECTION
OUTPUT RESOLUTION OUTPUT RESOLUTION
LAMP SELECT LAMP SELECT
LAMP RELAY LAMP RELAY
RS-232C RS-232C
SYSTEM INFORMATION SYSTEM INFORMATION
AIR FILTER CLEANING AIR FILTER CLEANING
DATE AND TIME DATE AND TIME
STARTUP LOGO STARTUP LOGO
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch "OUTPUT
RESOLUTION".
• The setting will change as follows each time
◄► is pressed.
SXGA+
• SXGA+ (1 400 × 1 050):
For projecting pictures onto a screen with an
aspect ratio of 4:3.
• SXGA (1 280 × 1 024):
For projecting pictures onto a screen with an
aspect ratio of 5:4.
1/2 1/2
2 2
FRONT-F FRONT-F
LOW LOW
H H
SXGA+ SXGA+
QUAD QUAD
OFF OFF
LOGO1 LOGO1
SXGA
ENGLISH –
77