Panasonic PT-D10000 Operating Instructions Manual page 80

Option2 settings (continued)
System information
Displays the system information of the projector.
1. Press ▲▼ to select "SYSTEM
INFORMATION".
OPTION2 OPTION2
PROJECTOR ID PROJECTOR ID
INSTALLATION INSTALLATION
ALTITUDE ALTITUDE
DIRECTION DIRECTION
LAMP SELECT LAMP SELECT
LAMP RELAY LAMP RELAY
RS-232C RS-232C
SYSTEM INFORMATION SYSTEM INFORMATION
AIR FILTER CLEANING AIR FILTER CLEANING
DATE AND TIME DATE AND TIME
STARTUP LOGO STARTUP LOGO
PASSWORD PASSWORD
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
2. Press ENTER.
• The "SYSTEM INFORMATION" screen will be
displayed.
SYSTEM INFORMATION SYSTEM INFORMATION
ROM VERSION ROM VERSION
NETWORK VERSION NETWORK VERSION
SUB VERSION SUB VERSION
PROJECTOR RUNTIME PROJECTOR RUNTIME
LAMP1 RUNTIME LAMP1 RUNTIME
LAMP2 RUNTIME LAMP2 RUNTIME
LAMP3 RUNTIME LAMP3 RUNTIME
LAMP4 RUNTIME LAMP4 RUNTIME
CHANGE CHANGE
3. Press ◄► to move to the next
page.
SYSTEM INFORMATION SYSTEM INFORMATION
ON COUNT ON COUNT
POWER ON TIMES POWER ON TIMES
LAMP 1 ON LAMP 1 ON
LAMP 2 ON LAMP 2 ON
LAMP 3 ON LAMP 3 ON
LAMP 4 ON LAMP 4 ON
SHUTTER SHUTTER
AIR FILTER CLEANING AIR FILTER CLEANING
AUX AUX
NUMBER OF ENTRY SIGNAL NUMBER OF ENTRY SIGNAL
CHANGE CHANGE
80
– ENGLISH
2 2
FRONT-F FRONT-F
LOW LOW
H H
QUAD QUAD
OFF OFF
LOGO1 LOGO1
1.00.00 1.00.00
1.00 1.00
1.00 1.00
1000h 1000h
500h 500h
500h 500h
500h 500h
500h 500h
100 100
50 50
50 50
50 50
50 50
9( 9( 0) 0)
3( 3( 0) 0)
MD77DV:DN MD77DV:DN
1/96 1/96
Cleaning the air filter
This can be used to set air filter cleaning.
1. Press ▲▼ to select "AIR FILTER
CLEANING".
OPTION2 OPTION2
PROJECTOR ID PROJECTOR ID
INSTALLATION INSTALLATION
ALTITUDE ALTITUDE
DIRECTION DIRECTION
LAMP SELECT LAMP SELECT
LAMP RELAY LAMP RELAY
RS-232C RS-232C
SYSTEM INFORMATION SYSTEM INFORMATION
AIR FILTER CLEANING AIR FILTER CLEANING
DATE AND TIME DATE AND TIME
STARTUP LOGO STARTUP LOGO
PASSWORD PASSWORD
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
2. Press ENTER.
• The "AIR FILTER CLEANING" screen will be
displayed.
• You can select the automatic cleaning time
("TIME") and also force cleaning to be carried
out immediately ("EXECUTE").
AIR FILTER CLEANING AIR FILTER CLEANING
TIME TIME
EXECUTE EXECUTE
MENU SELECT MENU SELECT
CHANGE CHANGE
3. Press ▲▼ to select "TIME".
• Select "TIME" and then set the time for
automatic cleaning to be carried out.
• If you would like cleaning to be carried out
straight away, select "EXECUTE" and then
press ENTER.
4. Press ◄► to switch "TIME".
• The setting will change as follows each time
◄► is pressed.
00:00
(in units of 10 minutes)
• The default setting is "00:00" (midnight).
Example: When the default setting is in use,
automatic cleaning will start at 00:00 if the
projector is in projection mode. If the time
is set to 7:00, automatic cleaning will start
at that time if the projector is in projection
mode.
2 2
FRONT-F FRONT-F
LOW LOW
H H
QUAD QUAD
OFF OFF
LOGO1 LOGO1
00:00 00:00
23:50